Oil Pan Lower Section, Removing And Installing: Removing

• Engine oil drained. Refer to ENGINE OIL .

Depending on the model, preliminary work may be required. Refer to OIL PAN LOWER SECTION, REMOVING AND INSTALLING .

-- Disconnect the connector -arrow- from the Oil Level Thermal Sensor -G266-.

Fig 1: Oil Pan Lower Section - Tightening Sequence

Courtesy of AUDI OF AMERICA, LLC

-- Free up the wires.

-- Place a cloth underneath to catch any escaping engine oil.

-- Loosen and remove the bolts in the following sequence: -18 to 1-.

-- Loosen and remove the oil pan lower section carefully from the bonding.