Oil Separator, Removing And Installing: Removing

Depending on the model, preliminary work may be required. Refer to OIL SEPARATOR, REMOVING AND INSTALLING .

Cylinder Bank 1 (Right):

Courtesy of AUDI OF AMERICA, LLC

-- Remove the crankcase ventilation hoses -1 and 3- by pressing the release buttons on both sides.

-- If necessary, free up the wiring harness or coolant line.

-- Remove the bolts -arrows- and the oil separator -2-.

Audi RS6 / RS7 / A8 / RSQ8 / SQ8 / SQ7, Cylinder Bank 2 (left):

Courtesy of AUDI OF AMERICA, LLC

-- Remove the crankcase ventilation hoses -2- by pressing the release buttons on both sides.

-- Remove the bolts -arrows- and the oil separator -1-.

Audi S8, cylinder bank 2 (left):

Courtesy of AUDI OF AMERICA, LLC

-- Remove the crankcase ventilation hoses -1 and 3- by pressing the release buttons on both sides.

-- Remove the bolts -arrows- and the oil separator -2-.