Clamping Sleeve Installation Position

Installation Position of the Right Clamping Sleeve

Fig 1: Installation Position For Front Clamping Sleeve

Courtesy of AUDI OF AMERICA, LLC

-- Install the clamping sleeve in the position shown.

• Angle -α- = approximately 35°±5°.
• Threaded connection to the right.
• The nuts are toward the top.

Installation Position of the Left Clamping Sleeve

Fig 2: Installation Position for Rear Clamping Sleeve

Courtesy of AUDI OF AMERICA, LLC

-- Install the clamping sleeve in the position shown.

• Angle -α- = approximately 35°±5°.
• Threaded connections are to the left.
• The nuts are toward the top.