LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> Electrical >> Wiring Diagrams >> Wiring >> 97 Wiring >> Relay Panels, Fuse Panels And E-Boxes >> Relay And Fuse Panels Inside Luggage Compartment On Left Side, Removing And Installing >> Relay and Fuse Panel 3 -SR3-, REMOVING AND INSTALLING >> Removing

Relay and Fuse Panel 3 -SR3-, REMOVING AND INSTALLING: Removing

-- Remove the luggage compartment left trim panel. Refer to LUGGAGE COMPARTMENT SIDE TRIM PANEL, REMOVING AND INSTALLING .

-- Release and disconnect the connectors -2 and 3-.

GWWA97-12359Courtesy of AUDI OF AMERICA, LLC

-- Free up the connector -1-.

-- Release the retainers in direction of -arrow-.

-- Lift the fuse panel F -4- and remove to the right.

-- Open the clip in direction of -arrow- and remove the fuse panel -2- toward the rear from fuse panel F -1-.

Fig 1: Fuse Panel
GWWA97-10872Courtesy of AUDI OF AMERICA, LLC

-- Open the clip and remove the auxiliary fuse panel -2-.

Fig 2: Auxiliary Fuse Panel
GWWA97-10873Courtesy of AUDI OF AMERICA, LLC

-- Release the clips in direction of -arrows- and remove the relay -1- and the control modules from the relay panels.

-- Open the clips in direction of -arrows- and remove the relay panel -2- from the fuse panel F -1- to the rear.

Fig 3: Identifying Relay Panel And Connector Station
GWWA97-11266Courtesy of AUDI OF AMERICA, LLC

-- Remove fuse panel F.