Component Location Overview - 48V System Wire Junction

Fig 1: Exploded View Of 48V System Wire Junction

Courtesy of AUDI OF AMERICA, LLC

1. Mount
   • For Suppressor -C24-
   • Removing and installing. Refer to Suppressor -C24-, REMOVING AND INSTALLING, 48V SYSTEM .
2. Suppressor -C24-
   • Removing and installing. Refer to Suppressor -C24-, REMOVING AND INSTALLING, 48V SYSTEM .
3. Cover
4. Positive Cable
   • To starter, generator
5. Nut
   • 16 Nm
6. Positive Cable
   • From the Battery -A-
7. Nut
   • 20 Nm
8. Terminal 30a Wire Junction -TV3-
   • Component Location Overview. Refer to Component Location Overview - Terminal 30 Wire Junction -TV2- and Terminal 30a Wire Junction -TV3- .
9. Nut
   • Tightening specification. Refer to - ) COMPONENT LOCATION OVERVIEW - RELAY PANEL, INSTRUMENT PANEL, E-BOXES ENGINE COMPARTMENT - List Item: Nut.
10. Wire
    • To the Suspension Stabilization Control Module 1 -J1152-
11. Nut
    • 20 Nm
12. Wire
13. Nut
    • 9 Nm
14. Terminal 40 Wire Junction -TV66-
    • Removing and installing. Refer to Terminal 40 Wire Junction -TV66-, REMOVING AND INSTALLING .
15. Bolt
    • 3 Nm
    • Quantity: 2
16. Nut
    • 3 Nm
    • Quantity: 3
17. Terminal 30 Wire Junction -TV2-
    • Removing and installing. Refer to Terminal 30 Wire Junction -TV2-, REMOVING AND INSTALLING, VEHICLES WITH 48V SYSTEM .