Brake Shield, Removing And Installing: Installing

Install in reverse order of removal and note the following:

TIP:

Clean bolts before reusing.
Replace damaged bolts.
Always replace self-locking bolts.

-- Clean the contact surfaces on the brake shield and wheel hub.

-- Install the brake rotor. Refer to BRAKE ROTOR, REMOVING AND INSTALLING .

CAUTION:

Faulty brakes increase the risk of an accident.

- Make sure the brakes are working correctly before driving the vehicle for the first time.

-- With the vehicle stationary, firmly press the brake pedal several times so that the brake pads in the operating condition properly sit in their respective position.