Brake Pad Wear Indicator Wire, Removing And Installing: Installing
-- Insert the contact -1- for the brake pad wear indicator with the clip -2- until it engages in the brake pad.
-- Secure the brake pad wear indicator wire with the protective cap -3- and engage on the brake caliper -arrows- as shown.
NOTE:
Make sure that the wire is routed correctly.
Make sure the wire is not blocked, bent, or rubbing against the vehicle.
-- Bring the connector -5- into its installed position and turn in the direction of -arrow- until the tab -2- engages in the opening -1- on the bracket.
-- Connect the connector -4-.