LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Components (Brake System) >> 47 Hydraulic Components >> Vacuum System >> Vacuum Pump, Removing And Installing >> Vacuum Pump, Removing And Installing, Vehicle With 3.0L TFSI Engine >> Removing

Vacuum Pump, Removing And Installing, Vehicle With 3.0L TFSI Engine: Removing

-- Remove the lower air duct pipe. Refer to AIR DUCT PIPE, REMOVING AND INSTALLING .

-- Loosen the hose clamp -1- and remove the vacuum hose.

Fig 1: Locating Hose Clamp -1-
GWWA47-10199Courtesy of AUDI OF AMERICA, LLC

TIP:

Do not damage the vacuum hose.

A damaged vacuum hose must be replaced.

-- Remove the bolts -arrows- and remove the vacuum pump.