Sill Panel Trim, Removing And Installing: Removing
Versions with Illuminated Sill Panel:
-- Remove the front sill panel. Refer to SILL PANEL, REMOVING AND INSTALLING .
-- Lift the carpet slightly and release and disconnect the connector -3-.
-- Free up the wire by slightly pulling the seal -2- away from the body flange.
Continuation:
-- Carefully warm up the sill panel trim -1- using the : VAS1978/14A .
-- Carefully pry out the sill panel trim from the side sill in direction of -arrow- using the : 3409 . Do not damage the paint coat while doing so.