LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat Upholstery, Covers >> 74 Seat Upholstery, Covers >> Rear Seat Covers And Cushions >> Side Cushion, Removing And Installing >> Side Cushion Without Thorax Airbag, Removing And Installing >> Installing

Side Cushion Without Thorax Airbag, Removing And Installing: Installing

Install in reverse order of removal and Note The Following: 

-- Remove the used clip -2- from the side cushion bracket.

-- Press the new clip into the side cushion bracket until it clicks into place.

-- Insert the side cushion and press in the wire frame forcefully into the clip.

-- Make sure the wire hook engages correctly into the clip.