Cover And Cushion, Separating, Rear Bench Seat: Removing

-- Remove the rear bench seat cover and the cushion. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, REAR BENCH SEAT .

1/3 Bench Seat: 

-- Disengage the moldings -arrows- on the wire frame and pull back the cover.

2/3 Bench Seat: 

-- Disengage the moldings -arrows- on the wire frame and pull back the cover.

3/3 Bench Seat: 

-- Disengage the moldings -arrows- on the wire frame and pull back the cover.

Continuation:

-- Remove the cover -2- as much as possible from the cushion -1- .

-- Cut through the upholstery clips -arrow- with pliers.

-- Cut the remaining upholstery clips and remove the cover from the cushion.