Cover And Cushion, Removing And Installing, Rear Bench Seat: Removing

-- Move the front seats all the way forward.

-- If equipped, remove the child seat anchor. Refer to OVERVIEW - FRONT CHILD SEAT ANCHORS / FRONT CHILD SEAT ANCHOR, REMOVING AND INSTALLING .

One-Piece Rear Bench Seat: 

-- Pull the release -4- on the mounting grommets -3- toward the front -arrow- and pull the rear bench seat cushion upward.

Multiple-Piece Rear Bench Seat: 

-- Pull the release -4- on the mounting grommets -3- toward the front -arrow- and pull the rear bench seat cushion upward.

Continuation:

-- Lift the front of the 2/3 rear bench seat cushion -1- slightly and remove the wire frame -2- forward from the frame -3- -arrows- .

-- Depending on vehicle equipment, release and disconnect any connectors.

-- Remove the rear bench seat from the vehicle.