Center Cushion, Removing And Installing, Backrest With Pass-Through: Removing

-- Remove the rear bench seat cover and cushion. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, REAR BENCH SEAT .

-- Move the front seats all the way forward.

-- Fold the rear seat backrests forward.

-- Pry out and remove the cover -1- molding -arrow- for the center cushion from the backrest frame using a screwdriver.

-- Fold the rear seat backrests toward the rear.

-- Push the center cushion -1- downward -arrows- , disengage and remove at backrest with the pass-through.