Seat Depth Adjuster Heating Element, Removing And Installing

The old seat heating element remains on the cushion and will be covered by the new heating element.

Procedure 

-- Remove the cushion. Refer to SEAT BOLSTER CUSHION / COVER AND CUSHION ON SEAT PAN, REMOVING AND INSTALLING, COMFORT/SPORT/SUPER SPORT SEAT .

-- Cut the wire directly on the old heating element.

-- Align the new heating element -arrow- on the cushion.

-- Peel the protective film off the heating element one after the other. Be careful not to damage the heating element.

-- Glue the heating element so that it aligns with the old heating element and is not wrinkled.

Further installation is the reverse order of removal.