Front And Rear Seat Rail Cover, Removing And Installing: Removing
-- Move the front seat into its highest position.
-- Pry off the spindle cover -1- from the seat rail cover -2- and the forward/back adjustment spindle using a flat-head screwdriver or the :3409 .
Fig 1: Prying Cover Caps From Seat Rail Covers And Seat Fore/Aft Adjustment Spindle With Trim Removal Wedge 3409
-- Lift the inner side of the cover -1- slightly away from the seat rail -arrow A- by hand or using a flat-head screwdriver and remove the cover toward the front -arrow B-.