LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat Frames >> 72 Seat Frames >> Front Seats >> Headrest, Removing And Installing >> Headrest, Removing And Installing, Headrest With Height And Angle Adjuster >> Removing

Headrest, Removing And Installing, Headrest With Height And Angle Adjuster: Removing

-- Equipped on some models: remove the multimedia system display unit. Refer to the approrpriate service information .

-- Position the backrest toward the rear at an angle.

-- Grab the rear cover -1- at the lower edge and slide upward out of the locking mechanism -arrows-.

GWWA72-12055Courtesy of AUDI OF AMERICA, LLC

-- Move the headrest completely upward and forward.

-- Fold the rear trim -1- upward and disengage the hooks -arrows- from the front cover.

GWWA72-12056Courtesy of AUDI OF AMERICA, LLC

-- Loosen the front trim -1- at both retainers -arrows- using a small screwdriver and remove it.

GWWA72-12057Courtesy of AUDI OF AMERICA, LLC

-- Push the gap covers upward. Disengage the springs -arrow- toward the rear alternating at both headrest guides, and pull the headrest base upward at the same time.

GWWA72-12018Courtesy of AUDI OF AMERICA, LLC