Release the upper catches:

Courtesy of AUDI OF AMERICA, LLC

-- Insert the Wedge 02 from the :VAS895 015  between the cushion and the cover.

TIP:

Insert the outer edge of the wedge from the inside of the seat along the seat seam. Insert the wedge is slightly to the start of the steps.

-- Push the cushion to the side and release the hook -arrow A- and in the catch -arrow B- using the Wedge 03 and at the same time pull the backrest cover downward out of the catch.

-- Repeat the procedure for the hook on the opposite side.

Installing

Install in reverse order of removal and note the following:

-- Check if the backrest cover is correctly latched.