LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat Frames >> 72 Seat Frames >> Front Seat Pneumatic System >> Seat Bolster Inflation Adjuster Air Cushion, Removing And Installing >> Removing

Seat Bolster Inflation Adjuster Air Cushion, Removing And Installing: Removing

-- Remove the front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .

-- Remove the seat bolster cushion / cover and cushion. Refer to SEAT BOLSTER CUSHION / COVER AND CUSHION ON SEAT PAN, REMOVING AND INSTALLING, COMFORT/SPORT/SUPER SPORT SEAT .

-- Disconnect the pneumatic lines -1- to the seat bolster inflation adjuster on the left and right side of the seat by carefully lifting the safety catch slightly using a small screwdriver -arrow-

GWWA72-12041Courtesy of AUDI OF AMERICA, LLC

-- Remove the screws -3-.

GWWA72-12048Courtesy of AUDI OF AMERICA, LLC

-- Remove the expanding clip -2-.

-- Disengage the upholstery wire -1- in the direction of -arrow A- and direction of -arrow B- from the seat bolster inflation adjuster bracket -2-.

GWWA72-12700Courtesy of AUDI OF AMERICA, LLC

-- Remove the seat bolster inflation adjuster bracket -2-.