Pneumatic Lines, Disconnecting And Connecting

Special tools and workshop equipment required 

• Hose Cutting Pliers :VAS6228 
• Assembly Pliers :VAS6618/1  , quantity: 2

Pneumatic Line, Cutting

Fig 1: Cutting Pneumatic Line

Courtesy of AUDI OF AMERICA, LLC

-- Position the :VAS6228  at a right angle and cut the pneumatic line -1-.

Pneumatic Line, Connecting

Fig 2: Identifying Pneumatic Lines & Line Connector

Courtesy of AUDI OF AMERICA, LLC

-- Slide the pneumatic lines -1- and -3- onto the line connector -2- on both sides using the :VAS6618/1  . Refer to the Parts Information for the wiring connector.

-- Pull on the pneumatic lines to make sure they are connected completely.