Rear Pull Handle, Removing And Installing: Removing

Fig 1: Rear Pull Handle

Courtesy of AUDI OF AMERICA, LLC

-- Remove the door trim panel. Refer to REAR DOOR TRIM PANEL, REMOVING AND INSTALLING .

-- Place the door trim panel on a soft and clean surface.

-- Remove the insulation mat  ) OVERVIEW - REAR DOOR TRIM PANEL - List Item: Insulation Mat.

-- Release and disconnect the connectors at the rear of the door trim panel.

-- Remove the bolts (quantity: 12) -arrows-.

-- Remove the pull handle with the armrest -1- from the door trim panel.

-- Unclip the switch mount -1- from the pull handle with the armrest -2- using the : T10383/1  in the -direction of the arrow- and remove it.

Courtesy of AUDI OF AMERICA, LLC