LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Trim Panels And Insulation >> 70 Trim Panels And Insulation >> Luggage Compartment Trim Panels >> Rear Luggage Compartment Floor Handle, Removing And Installing >> Removing

Rear Luggage Compartment Floor Handle, Removing And Installing: Removing

Fig 1: Removing Luggage Compartment Floor Panel Handle
GWWA70-12011Courtesy of AUDI OF AMERICA, LLC

-- Remove the luggage compartment floor. Refer to LUGGAGE COMPARTMENT FLOOR, REMOVING AND INSTALLING .

-- Release the frame -1- on the bottom of the luggage compartment floor.

-- To do this, position the Pry Lever: 80 - 200  in the direction of -arrow A-, and release the frame -direction of arrow B-.

-- Release the frame and remove the luggage compartment floor panel handle -2-.