LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Trim Panels And Insulation >> 70 Trim Panels And Insulation >> Luggage Compartment Trim Panels >> Rear Luggage Compartment Floor Handle, Removing And Installing >> Installing

Rear Luggage Compartment Floor Handle, Removing And Installing: Installing

Fig 1: Positioning Mounting Bracket
GWWA70-12009Courtesy of AUDI OF AMERICA, LLC

Install in the reverse order of removal while noting the following:

-- Position the frame -arrow- from below in the cut-out in the luggage compartment floor and hold.

-- Push the luggage compartment floor panel handle opposite the direction of travel in the frame direction of -arrow 1- and lock downward in the -direction of the arrow 2-.

Fig 2: Installing Luggage Compartment Handle
GWWA70-12010Courtesy of AUDI OF AMERICA, LLC