Instrument Cluster Trim, Removing And Installing: Removing
-- Position the steering wheel as far back and down as possible.
-- Remove the instrument panel side cover. Refer to INSTRUMENT PANEL SIDE COVER, REMOVING AND INSTALLING .
-- Remove the instrument panel side decorative trim. Refer to INSTRUMENT PANEL SIDE DECORATIVE TRIM, REMOVING AND INSTALLING .
-- Remove the light switch trim. Refer to LIGHT SWITCH TRIM, REMOVING AND INSTALLING .
-- Remove the instrument panel vent on the driver side. Refer to DRIVER SIDE INSTRUMENT PANEL VENT, REMOVING AND INSTALLING .
-- Remove the center instrument panel decorative trim. Refer to INSTRUMENT PANEL DECORATIVE TRIM, REMOVING AND INSTALLING, CENTER .
-- Pry off the gap cover -1- with the scraper -A- in the direction of the -arrow-.
-- Unclip the gap cover trim -1- using the scraper -A- in the direction of -arrow B- and remove.
-- Unclip the trim -2- all around using the : 3409 in the direction of -arrow C-.
-- Guide the instrument cluster trim -2- carefully out of the instrument panel and remove.