Rear Lid, Removing And Installing: Installing

Install in reverse order of removal and note the following:

-- Adjust the rear lid. Refer to REAR LID, ADJUSTING .

Depending on the version, the following additional work procedures are required

-- Calibrate the Rearview Camera -R189-. Refer to REARVIEW CAMERA SYSTEM, CALIBRATING .

Note the conditions here for a required calibration of the Rearview Camera -R189-.

-- Calibrate the Rear Peripheral Camera -R246-. Refer to PERIPHERAL CAMERA, CALIBRATING .

Note the conditions here for a required calibration of the Rear Peripheral Camera -R246-.

Tightening Specifications