Rear Lid Drive Unit -VX69- /Rear Lid Drive Unit 2 -VX77-, REMOVING AND INSTALLING: Installing

Install in reverse order of removal and note the following:

• Do not hold the rear lid drive unit on the cable when installing.
• The rear lid being completed must be guided by hand, since the rear lid drive unit can destroy the rear lid when the weight is too low.
• The ball sockets on the rear lid drive unit must not strike the ball pins, but rather they must be placed at an angle and be pressed on with a rotational movement.

-- Perform an adaptation. Refer to Rear Lid Drive Unit -VX69- /Rear Lid Drive Unit 2 -VX77-, PROGRAMMING .