Overview - Hood

Fig 1: Exploded View Of Hood

Courtesy of AUDI OF AMERICA, LLC

Hood
- Removing and installing. Refer to HOOD, REMOVING AND INSTALLING .
- Adjusting. Refer to HOOD, ADJUSTING .
Impact Guard
- Right side
- Removing and installing. Refer to SIDE IMPACT GUARD, REMOVING AND INSTALLING .
Impact Guard
- Center
- Removing and installing. Refer to CENTER IMPACT GUARD, REMOVING AND INSTALLING .
Impact Guard
- Left side
- Removing and installing. Refer to SIDE IMPACT GUARD, REMOVING AND INSTALLING .
Striker
- Left
- Removing and installing. Refer to STRIKER, REMOVING AND INSTALLING .
- Adjusting. Refer to SIDE AND HEIGHT ADJUSTMENT AT STRIKER .
Plug
Adjusting Buffer
- Adjusting. Refer to HEIGHT, ADJUSTING USING ADJUSTING BUFFER .
Insulation
- Removing and installing. Refer to NOISE INSULATION, REMOVING AND INSTALLING .
Grommet
Hinge
- Left
- Removing and installing. Refer to HINGES, REMOVING AND INSTALLING .
- Adjusting. Refer to SIDE, LENGTH AND HEIGHT ADJUSTMENT AT HINGE .
Bolt
- 21 Nm
- Quantity: 2
Nut
- 21 Nm
- Quantity: 2
Nut
- 8 Nm
- Quantity: 2
Clip
- For the insulation
- Engages audibly
Hinge
- Right
- Removing and installing. Refer to HINGES, REMOVING AND INSTALLING .
- Adjusting. Refer to SIDE, LENGTH AND HEIGHT ADJUSTMENT AT HINGE .
Gas-Filled Strut
- Removing and installing. Refer to GAS-FILLED STRUT, REMOVING AND INSTALLING .
- Venting. Refer to GAS-FILLED STRUT, VENTING .
Bolt
- 21 Nm
Mounting Bracket
- For the gas-filled strut
Hinge
- Right
- Removing and installing. Refer to HINGES, REMOVING AND INSTALLING .
- Adjusting. Refer to SIDE, LENGTH AND HEIGHT ADJUSTMENT AT HINGE .