Overview - Impact Member

Fig 1: Exploded View Of Front Impact Member

Courtesy of AUDI OF AMERICA, LLC

Bolt
- 8 Nm
- Quantity: 4
Support
- Right
- For headlamp mount
- Removing and installing. Refer to HEADLAMP MOUNT SUPPORT, REMOVING AND INSTALLING .
Support
- Left
- For headlamp mount
- Removing and installing. Refer to HEADLAMP MOUNT SUPPORT, REMOVING AND INSTALLING .
Expanding Rivet
Bracket
- For the Outside Air Temperature Sensor -G17-
- Removing and installing. Refer to Outside Air Temperature Sensor -G17- BRACKET, REMOVING AND INSTALLING .
Impact Member
- Removing and installing. Refer to IMPACT MEMBER, REMOVING AND INSTALLING .
Bolt
- 4.5 Nm
- For securing the impact member to the lock carrier
Bolt
- 60 Nm
- Quantity: 8
Air Duct
- Left
Molded Foam Part
- Removing and installing. Refer to MOLDED FOAM PART, REMOVING AND INSTALLING .
Air Duct
- Right