Cigarette Lighter -U1- /12 V Socket -U5-, REMOVING AND INSTALLING: Installing
Install in reverse order of removal and note the following:
CAUTION:
There Is a Risk of Injury If the Cigarette Lighter Is Ejected from the Socket After It Has Heated.
- Check the tab on the socket.
- After removing the socket, push the springs back together carefully.
-- Remove the support -1- on the : T40148 .
-- Slide the piston down and hold it in place.
-- Turn the thumbwheel -4- on the : T40148 counter-clockwise in direction of -arrow-. This loosens the release tabs -2- on the cigarette lighter -3- so the : T40148 can be removed.