Front Information Display Control Head 2 -J1060-, REMOVING AND INSTALLING: Installing

Install in reverse order of removal and note the following:

If the Front Information Display Control Head 2 -J1060- is being replaced, the following procedure applies:

-- Connect the Vehicle Diagnostic Tester.

Front Information Display Control Head 2 -J1060-, Replacing

-- Select the Diagnostic  mode and start the diagnosis.

-- Select the Test plan  tab.

-- Select the Select individual test  button and select the following tree structure consecutively:

• Diagnostic-capable systems
• 005F - Information Electronics Control Module 1 - J794
• 005F - Information Electronics Control Module 1, functions
• 069B - Front Information Display Control Head 2 -J1060-, replacing