Terminal 30 Wire Junction -TV2-, REMOVING AND INSTALLING: Removing

-- Disconnect the ground cable to the Battery -A- when the ignition is switched off. Refer to BATTERY, DISCONNECTING AND CONNECTING .

-- Remove the Terminal 30a Wire Junction -TV3- and move it to the side with the wires still connected. Refer to Terminal 30a Wire Junction -TV3-, REMOVING AND INSTALLING .

-- Release and disconnect the connector -4-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the nuts -3 and 5- and remove the wires -2 and 6-.

-- Remove the nuts -arrows-.

-- Remove the wire junction -1- from the threaded pins.