MAIN FUSE PANEL ON Battery -A-, REMOVING AND INSTALLING: Removing

-- Disconnect the ground cable to the Battery -A- when the ignition is switched off. Refer to BATTERY, DISCONNECTING AND CONNECTING .

• On vehicles with 48 volt system (PR number VH2/VH3) must be de-energized before the 48 V system. Refer to 48V SYSTEM, DE-ENERGIZING .

-- Open the cover -1- over the battery positive terminal.

Fig 1: Battery Ground Cable Connector With Bolt

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the nut -3- several turns and remove the battery positive cable terminal clamp -2- from the battery terminal.

-- Release the catch -3- and open the flap -2- above the main fuse panel -1- in direction of -arrow-.

Fig 2: Fuse Box Cover, Removal

Courtesy of AUDI OF AMERICA, LLC

-- Remove the wires -1, 2, 4, 5, and 6-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the main fuse panel -3-.