Terminal 40 Wire Junction -TV66-, REMOVING AND INSTALLING: Removing

-- De-energize the 48V system. Refer to 48V SYSTEM, DE-ENERGIZING .

-- Release the retainer in direction of -arrow- and open the cover -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the nuts -1, 2 and 3- and free up the wires -5, 6 and 7-.

Courtesy of AUDI OF AMERICA, LLC

-- Close the wire junction cover -4-.

-- Remove the screws -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the 48V system wire junction -1-.