Vehicles With Coil Springs, Checking The Curb Weight Position For Axle Alignment, AUDI Q7: Notes
The curb weight position must be checked before beginning an axle alignment on vehicles with coil springs. Explanation of the curb weight position. Refer to TEST REQUIREMENTS, AUDI Q7 .
Determine the dimension -a-, vehicles without wheel housing extension
-- Determine dimension -a- between the center of the wheel and the lower edge of the fender/wheel housing -1- as shown.
Determine the dimension -a-, vehicles with wheel housing extension
-- Determine dimension -a- between the center of the wheel and the lower edge of the fender/wheel housing -1- as shown.
- The fender/wheel housing lower edge -arrow- is a measuring point, not the wheel housing extension lower edge -2-.