LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ7 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Cooling System 3.0L) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Right Coolant Pipes On Longitudinal Member, Removing And Installing >> Removing

Right Coolant Pipes On Longitudinal Member, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .

-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Loosen the hose clamps -arrows- and remove the coolant hoses from the coolant pipes -1 and 2-.

Fig 1: Coolant Pipes on Longitudinal Member
GWWN19-11476Courtesy of AUDI OF AMERICA, LLC

-- Remove the nuts -3- and remove the coolant pipes -1 and 2-.