Transmission Fluid Cooler Auxiliary Radiator, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Release the left and right catches, and remove the side air ducts -1 and 2-.
-- Place the Shop Crane - Drip Tray: VAS6208 underneath.
-- Disconnect the right coolant hoses -2- and the left with the Hose Clamps - Up To 25 mm: 3094 .
-- Loosen the hose clamps -arrow- and remove the coolant hoses -2- from the auxiliary radiator for transmission fluid cooling -1-.
-- Carefully disengage and remove the auxiliary radiator for the right and left transmission fluid cooler from the bracket -4- in direction of -A arrows-.