Transmission Fluid Cooler Auxiliary Radiator, Removing And Installing: Installing
WARNING: This page is about a different car, the 2022 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
- If there are small impressions on the slats. Refer to RADIATOR AND CONDENSER ASSEMBLY .
- Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts Information.
-- If the rubber bushing -3- has been loosened from the bracket -4- reinsert the rubber bushing -3- in the bracket -4-.
-- The rubber bushing -5- is pushed together with the auxiliary radiator for transmission fluid cooling -1- in the bracket -4-.
-- Insert the auxiliary radiator for the left and right transmission fluid cooler -1- carefully in the bracket -4- in direction of -B arrows-.