Coolant Expansion Tank, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

-- Lift the clamp -2- and remove the breather line -3-.

-- Remove the bolts -arrows-.

-- Remove the coolant expansion tank upward from the bracket -4-.

Courtesy of AUDI OF AMERICA, LLC

-- Release and disconnect the connector -1- for the Engine Coolant Level Sensor -G32-.

-- To catch the coolant, place a suitable drip tray under the coolant expansion tank.

Courtesy of AUDI OF AMERICA, LLC

-- Clamp off the coolant hose -5- with Hose Clamps - Up To 25mm: 3094 .

-- Lift the clip -4-, remove the coolant hose -5- and allow the coolant to drain.

-- Remove the coolant expansion tank.