Right Coolant Pipe On Transmission, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .
-- Remove the right subframe shield upper section. Refer to SUBFRAME SHIELD, REMOVING AND INSTALLING .
-- Place a cloth underneath to catch any escaping coolant.
-- Clamp off the coolant hoses using the Hose Clamps - Up To 25mm: 3094 .
-- Loosen the hose clamps -arrows- and remove the coolant hoses.
-- Remove the bolts -1 and 2- and remove the coolant pipe.