Rear Coolant Pipes 4 And 5, Removing And Installing: Installing
WARNING: This page is about a different car, the 2022 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
- Replace the O-rings after removing them.
- Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts Information.
-- Coat the new O-rings with coolant.
-- Install the rear coolant pipe 3. Refer to REAR COOLANT PIPE 3, REMOVING AND INSTALLING .