LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ7 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Cooling System 4.0L) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Rear Coolant Pipe 6, Removing And Installing >> Removing

Rear Coolant Pipe 6, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .

Vehicles with Catalytic Converter 

-- Remove the left catalytic converter. Refer to CATALYTIC CONVERTER, REMOVING AND INSTALLING .

Vehicles with Particulate Filter 

-- Remove the left particulate filter. Refer to PARTICULATE FILTER, REMOVING AND INSTALLING .

Continuation for All Vehicles 

-- Loosen the hose clamp -1- and remove the coolant hose.

GWWA19-12865Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and remove the coolant pipe -2-.