Battery Load Test Results

WARNING: This page is about a different car, the 2022 Audi SQ7, 2022 Audi S7, and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

By placing the battery under a strong load during the Battery -A- load test, the battery voltage will be reduced.

If the Battery -A- is good, the voltage drops only to the specified minimum voltage.
If the Battery -A- is defective or weakly charged, the battery voltage will drop very quickly to below the specified minimum voltage.
After testing, this low voltage level is maintained for a lengthy period and only increases again slowly.
Only perform the test once. Repeating the test will not produce accurate results.
In order to be able to test another/additional Battery -A-, the : VAS5097A must cool down for approximately 30 minutes for the test result to be correct.