Coolant Connection, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Heat Shield

Courtesy of AUDI OF AMERICA, LLC

-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- and remove the heat shield -1-.

-- Catch escaping coolant with a cloth.

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the corresponding hose clamps -1- or -4-, then clamp off the coolant hoses with the Hose Clamps - Up To 25mm: 3094 and then remove them.

-- Remove the bolt -2- or -3- and remove the coolant connection.