Centering Bracket, Removing And Installing
WARNING: This page is about a different car, the 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
Procedure
- The transmission is removed. Refer to the appropriate service information .
-- Pry out the centering bracket -arrow- using the Puller - Crankshaft/Power Steering Seal: T20143/2 .
-- Clean the seat surface for the centering bracket.
-- Press in the centering bracket flush -arrow- using the Seal Installer - Selector Shaft Oil Seal: T10174 .