Brake Shield, Removing And Installing: Installing
WARNING: This page is about a different car, the 2022 Audi Q7, 2021 Audi Q7, and 2020 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Clean bolts before reusing.
- Replace damaged bolts.
- Always replace self-locking bolts.
Install in reverse order of removal and note the following:
-- Clean the contact surfaces on the brake shield and wheel hub.
-- Install the brake rotor. Refer to BRAKE ROTOR, REMOVING AND INSTALLING .
WARNING:
Risk of accident!
- With the vehicle stationary, firmly press the brake pedal several times so that the brake pads in the operating condition properly set in their respective position.
- Make sure the brakes are working correctly before driving the vehicle for the first time.