Brake Rotor, Removing And Installing, Ceramic Brakes: Removing

WARNING: This page is about a different car, the 2022 Audi Q7, 2021 Audi Q7, and 2020 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the brake caliper. Refer to BRAKE CALIPER, REMOVING AND INSTALLING .

CAUTION:

Danger of causing damage to the ceramic brake rotor.

Do not drop the brake rotor.
Do not remove the brake rotor from the hub with a hammer.
Do not loosen the brake rotor from the hub by prying.

-- Remove the bolt -1- and remove the brake rotor by hand. Do not use any tools.

Fig 1: Identifying Bolts

Courtesy of AUDI OF AMERICA, LLC

If the brake rotor is seized, do the following:

-- Install two M8 bolts -arrows- all the way into the threaded holes of the brake rotor.

-- Tighten the bolts ¹ /₂ turn farther alternating from side to side to loosen the brake rotor from the wheel hub.