LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ7 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Mechanical Components (Brake System)) >> 46 Mechanical Components >> Front Brakes >> Brake Rotor, Removing And Installing >> Brake Rotor, Removing And Installing, Steel Brakes >> Removing

Brake Rotor, Removing And Installing, Steel Brakes: Removing

WARNING: This page is about a different car, the 2022 Audi Q7, 2021 Audi Q7, and 2020 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the brake caliper. Refer to BRAKE CALIPER, REMOVING AND INSTALLING, STEEL BRAKES .

-- Remove the bolt -arrow- and remove the brake rotor.

Fig 1: Identifying Bolt And Brake Rotor
GWWA46-10405Courtesy of AUDI OF AMERICA, LLC
CAUTION:

Risk of damaging the brake rotors.

  • Do not use force to separate the brake rotor from the wheel hub. If required, use rust remover.
scientia non olet · About LEMON Manuals