Checking the Pressure Relief Valve in the Version 1 Cap

Fig 1: Coolant Expansion Tank

Courtesy of AUDI OF AMERICA, LLC

-- Position the : VAG1274B  with : VAG1274B/15  on the cap.

Fig 2: Identifying VAG1274B & VAG1274B/15

Courtesy of AUDI OF AMERICA, LLC

-- Generate approximately 2.0 bar (29.0 psi) pressure using the cooling system tester hand pump.

Blue Cap:

• The pressure must lower to 1.6 to 1.4 bar (23.2 to 20.3 psi) and stay there.

Black Cap:

• The pressure must lower to 1.8 to 1.6 bar (26.1 to 23.2 psi) and stay there.

All Caps:

-- If the pressure relief valve does not react as specified, replace the cap.

Checking the Pressure Relief Valve in the Version 2 Cap:

Courtesy of AUDI OF AMERICA, LLC

-- Position the : VAG1274B  with the : VAG1274/9  on the cap -1-.

Fig 3: Identifying VAG1274B & VAG1274/9

Courtesy of AUDI OF AMERICA, LLC

-- Generate approximately 2.0 bar (29 psi) pressure using the cooling system tester hand pump.

Blue Cap:

• The pressure relief valve must open at a pressure of 1.4 to 1.6 bar (20.30 to 23.20 psi) and stay there.

Black Cap:

• The pressure relief valve must open at a pressure of 1.6 to 1.8 bar (23.20 to 26.10 psi) and stay there.

All Caps:

-- If the pressure relief valve does not react as specified, replace the cap.