LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ7 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Seat Frames) >> 72 Seat Frames >> Rear Seats >> Seat Frame, Disassembling And Assembling >> Tunnel-Side Seat Side Trim, Removing And Installing, Outer Second Row Seat >> Removing

Tunnel-Side Seat Side Trim, Removing And Installing, Outer Second Row Seat: Removing

WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
GWWA72-12143Courtesy of AUDI OF AMERICA, LLC

-- Seat Low: remove the cushion. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, SECOND ROW SEAT PAN LOW .

-- Seat High: remove the rear cover. Refer to REAR COVER, REMOVING AND INSTALLING, SEAT HIGH, SECOND ROW .

-- Remove the seat side trim inner piece -2- from the outer piece -1- -arrow-.

-- Remove the expanding clips -arrows-, disengage the seat side trim outer piece -1- upward and remove it.

GWWA72-12026Courtesy of AUDI OF AMERICA, LLC

2 -  Pull Loop for Backrest Release