Seat Adjustment Control Module, Removing And Installing, Third Row: Removing
WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Switch off the ignition.
-- Remove the luggage compartment floor bracket. Refer to LUGGAGE COMPARTMENT CARPET BRACKET, REMOVING AND INSTALLING .
-- Remove the nuts -arrows-.
-- Disengage the bracket -1- with the control module and free up the wiring harness.
-- Open the tabs -arrows-.
-- Remove the control module -1- from the bracket -2-.
-- Release the connector safety catch and disconnect the connectors -3-.