Overview - Rear Seat Backrest, Second Row Backrest With Center Armrest
WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Seat/Backrest Frame
- Cannot be separated
- Shaft
- for rear seat backrest locking mechanism
- Removing and Installing. Refer to REAR SEAT BACKREST LOCKING MECHANISM, REMOVING AND INSTALLING, CENTER SECOND ROW SEAT .
- Pull Loop
- Removing and Installing. Refer to SEAT SIDE TRIM, REMOVING AND INSTALLING, CENTER SECOND ROW SEAT .
- Spiral Spring
- Release Lever
- For backrest
- Pull Loop
- for rear seat backrest locking mechanism
- Removing and Installing. Refer to SEAT SIDE TRIM, REMOVING AND INSTALLING, CENTER SECOND ROW SEAT .
- Center Armrest
- Removing and Installing. Refer to CENTER ARMREST, REMOVING AND INSTALLING .
- Cupholder
- Removing and Installing. Refer to CUPHOLDER, REMOVING AND INSTALLING .
- Bolt
- Quantity: 3
- 6.5 Nm
- Trim
- For the center armrest
- Removing and Installing. Refer to CENTER ARMREST TRIM, REMOVING AND INSTALLING .
- Bolt
- Quantity: 2
- 6.5 Nm
- Stop
- For the center armrest
- Seat Belt Guide Inner Piece
- Removing and Installing. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, CENTER SECOND ROW BACKREST .
- Cover
- For the upper child seat anchor
- Press into the seat frame until it engages audibly.
- Removing and Installing. Refer to UPPER CHILD SEAT ANCHOR COVER, REMOVING AND INSTALLING, SECOND AND THIRD ROW .
- Lock Washer
- Replace after removing.